|
| |
|
Evolution PokeThru |
 | Wiremold's 6AT and 8AT
are the largest capacity poke-thru
devices on the market. The 6AT
Series provides up to two and one-half (2 1/2) gangs of power,
communication, or A/V capability. The 8AT Series provides up to four (4)
gangs of power, communication, or A/V capability. |
| Recessed devices.
All power, communication, and A/V devices are recessed below floor
level, providing maximum protection and device longevity. |
| The new Evolution Series poke-thru
design includes all metal die-cast
aluminum cover assemblies, with
two unique spring-loaded slide egress doors. No clumsy flip lids to get
broken or cause an added trip hazard. These new covers are available in
standard finishes of brass, gray, black, nickel and bronze, offering a
wider range of aesthetic options. |
| Audio/Video unit.
The 6AT Series is available in a dedicated A/V version and both the 6AT
and 8AT are designed to accept the Extron® Electronics AAP and MAAP
Series device lines. |
| TopGuard Protection.
All Evolution Series Poke-Thru Devices like every Wiremold/Legrand
Poke-Thru Device meets and exceeds UL scrub water exclusion requirements
for tile, carpet, and wood covered floors. |
|
|
CP-653 Speed Sleeve |
|
Hilti's CP-653 Speed
Sleeve is the
fastest most
reliable firestop penetration device
in the market today.
Round openings can be created via hole saw or core bits
and "Spin on" flanges promote
fast product installation.
Opening and closing the device is easy and intuitive:
from one side of the CP 653, depress the red tabs and twist the inner
housing providing for
easy penetration and
re-penetration
of cables. In addition, cables do not need to be inserted in a uniform
height to comply with the firestop detail. The unique construction smoke
seal limits smoke migration and provides for
extremely low L-ratings.
Like all Hilti products the device is rugged is designed to withstand
the rigors of usage and time. The smoke seal fabric is tested for 250
open-close cycles. |
|
|
MightyMo 10 |
| Ortronics new Mighty
Mo 10 cable
management rack is
designed to maximize the airflow of network equipment.
Honeycomb side rails and baffles work together to manage intake and
exhaust air, creating cold aisle/hot aisle air distribution from side
vented equipment. Available in 7' or 8' heights, the Mighty Mo 10 can be
assembled as a 19" or 23" rack, has a 16.25" channel depth and can fit
on a 2' x 2' floor tile. Its patented construction has built-in strain
relief, bend radius control and efficient patch cable routing with floor
and ceiling access to distribution cables. Optional vented double hinged
front and rear doors are also available for additional security. |
| The Mighty Mo 10 cable
management system also includes a server rack that is compatible with
all Mighty Mo 10 and Mighty Mo 6 racks and cable management. It is a 7'
high, four-post aluminum frame with mounting rails that adjust from
12.5" to 30", even after the rack is installed. |
| The system also
features the signature Mighty Mo vertical cable management cage with
door. Its design promotes efficient routing of patch cables between
racks, and the hinged door allows easy access for moves, adds and
changes and creates a finished look for data center installations. |
|
|
CABLETEK™ Vertical & Horizontal Cable
Managers |
|
CABLETEK™ Vertical cable managers,
available in single- and double-sided models, support and manage cables
in network rack-mounted equipment. They mount on the sides of, or
between, 2- and 4-post open-frame racks. Easy-to-remove front covers
ensure convenient access for cable installation and maintenance. The
front side of the managers provides support, management and high
capacity for patch cords. The back of the manager supports Cat 5e, 6, 6A
and fiber optic cables. Double-sided models include tool-less movable
posts and gates that snap into prepunched holes on the back of the cable
manager and can be repositioned as needed. Posts and gates are available
for the single sided models. |
|
CABLETEK™ Horizontal cable managers
available in 1RU and 2RU heights manage and route cable in all
applications with EIA standard 19-in. rack spacing. Use with cabinets or
2- and 4-post open-frame racks. Advanced design accommodates CAT 5e, 6,
and 6A cables. |
|
FEATURES
|
|
Snap-in mounting provision holds cable
manager in place while mounting screws are installed |
|
Robust arrowhead fingers are shaped to
funnel cables into base and are made of black composite material
|
|
Robust rounded end posts support cable as
it enters and leaves cable manager and maintains proper cable bend
radius |
|
Deep cable compartments allow maximum
cable density |
|
Rounded edges throughout protect cable
jackets from damage |
|
Pass-through holes on double-sided models
protect cable while facilitating routing between front and back sides
|
|
Single- and double-sided units provide
high cable capacity, including 5e, 6 and 6A cables |
|
Horizontal Removable hinged cover opens
top or bottom, snaps closed for assured cable protection and
professional appearance |
|
Horizontal Double-sided model has covers
on both front and back |
|
Horizontal Covers stay open during
installation and maintenance procedures |
|
Horizontal and vertical cable managers
designed as a system for streamlined appearance and improved
functionality |
|
|
Clarity Snap
Pre-Connectorized Solution |
|
Ortronics Clarity SNAP™
solution offers a truly modular approach to pre-connectorized cabling. |
|
Smaller, more robust high
speed connectors on each end of the cable assembly. |
|
Smaller ends make cables
easier to lay in or pull than competitive offerings utilizing full size
jacks or modules on each end |
|
These connectors offer
more robust
protection against
the challenges associated with being installed (pulled in) with the
cable |
|
|
Newly Redesigned LANmark 1000 |
| Berk-Tek's
LANmark-1000 has
been improved to offer best-in-class electrical performance. Berk-Tek's
engineers completely redesigned LANmark-1000 so that
all crosstalk parameters
could be improved by 4 dB.
As a result, the Power Sum Attenuation to Crosstalk ratio
(PSACR) is nearly 3 times
better (at 250 MHz)
allowing for much greater signal strength and less vulnerability to
noise interference. At Berk-Tek, we understand that your business runs
through us. |
|
|
Micro Data Center Plenum Fiber Optic Cables |
| Berk-Tek’s Micro Data Center Plenum
(MDP) cables are designed
specifically to enable high-density, backbone connectivity in existing
or new data centers. These rugged cables are available in fiber counts
from four to 72 optical fibers. This new cable design delivers
dramatically reduced cable diameters
of up to 50% compared to typical indoor/outdoor and
premises-distribution-style cable offerings. |
|
|
The New LANmark 10G2
10 Gig Cable |
| Berk-Tek's
LANmark™-10G2 is a
next generation cable for 10 gigabit Ethernet. LANmark-10G2 is a true
multi-media cable and is specifically designed to handle voice, video
and data simultaneously. This convergence of technologies simplifies
even the most dynamic network.
The 10G2 is a breakthrough
in cable technology,
and its patent-pending design minimizes alien crosstalk while
maintaining a nominal .30" outside diameter (CMP). |
|
|
Momentum 3 Low Loss
Pre-terminated Fiber Optic System |
| Ortronics Momentum 3
pre-terminated modular fiber optic system
enables quick deployment, eliminates the possibility of optical
performance flaws, and provides increased flexibility for network
design. Momentum 3
makes moves, adds and changes quick, easy and error-free, and ensures
unsurpassed optical performance with superior optical fiber and
best-in-class pre-terminated connectors. |
| Available with LC or
SC adapters, the Momentum 3 fiber cassettes are available for 50-micron
laser optimized, single-mode or 62.5/125-micron fiber MTP/MPO® backbone
cables. Momentum 3 also includes new premium performance low-loss LC
50-micron LOMF cassettes and patch cords.
When used together, the
low loss cassettes and patch cords provide a total cassette insertion
loss of 0.5dB. |
|
|
Please Excuse Us while our site
undergoes major reconstruction - Thank you